SpiderFX® Embolic Protection Device
Filter the Risk
The SpiderFX® Embolic Protection Device allows the use of any 0.014" - 0.018" guidewire for initial lesion cross and SpiderFX delivery catheter placement. The SpiderFX filter is deployed and recovered through a dual-ended and low-profile catheter compatible with a guide catheter/sheath minimum ID of 0.066" (typically a 6F guide catheter or 5F access/long sheath). All components of the device are delivered in a single hoop, with Capture Wire/Nitinol braid Filter pre-loaded in the Delivery End of the SpiderFX Catheter.
Guidewire of Choice
Superior trackability
6F guide/5F sheath compatible RX delivery catheter with low 3.2F crossing profile
Enhanced Visibility
Excellent Stability
Controlled filter positioning throughout the intervention and during device exchanges:
SpiderFX offers a broad size range of filter sizes (3 mm - 7 mm) — select the most appropriate filter for Carotid Interventions
Guidewire of Choice
- The SpiderFX Device allows atraumatic lesion crossing with YOUR CHOICE of any 0.014" or 0.018" guidewire
Superior trackability
6F guide/5F sheath compatible RX delivery catheter with low 3.2F crossing profile
- New Flexible Hypotube Connector reduces maximum force required to push filter by an average of 40% compared to SpideRX®
- 320 cm / 190 cm snapwire and 190 cm wire length options for OTW and RX device interventions
Enhanced Visibility
- Clearly visible radiopaque markers enable fast filter positioning
- New direct mouth indicator provides enhanced visualization of filter mouth opening

Excellent Stability
Controlled filter positioning throughout the intervention and during device exchanges:
- Braided nitinol design provides full wall apposition
- Capture Wire is designed to rotate and move longitudinally independent of the filter

SpiderFX offers a broad size range of filter sizes (3 mm - 7 mm) — select the most appropriate filter for Carotid Interventions
| SpiderFX - NEURO | |||||||
| Component | CAPTURE WIRE | DELIVERY END | RECOVERY END | GUIDE CATHETER / SEATH | |||
|---|---|---|---|---|---|---|---|
| Model Number | Filter Size (mm) | Lumen Size (mm) | Wire Length OTW/RX (cm) | Wire Diameter (inch/mm) | Crossing Profile (F) | Diameter (F) | Minimun ID (inch) |
| SPD2-US-030-190 | 3 | 3.0 | 190 | 0.014/0.36 | 3.2 | 4.2 | 0.066 |
| SPD2-US-030-320 | 3 | 3.0 | 320/190 | 0.014/0.36 | 3.2 | 4.2 | 0.066 |
| SPD2-US-040-190 | 4 | 3.1-4.0 | 190 | 0.014/0.36 | 3.2 | 4.2 | 0.066 |
| SPD2-US-040-320 | 4 | 3.1-4.0 | 320/190 | 0.014/0.36 | 3.2 | 4.2 | 0.066 |
| SPD2-US-050-190 | 5 | 4.1-5.0 | 190 | 0.014/0.36 | 3.2 | 4.2 | 0.066 |
| SPD2-US-050-320 | 5 | 4.1-5.0 | 320/190 | 0.014/0.36 | 3.2 | 4.2 | 0.066 |
| SPD2-US-060-190 | 6 | 4.5-6.0 | 190 | 0.014/0.36 | 3.2 | 4.2 | 0.066 |
| SPD2-US-060-320 | 6 | 4.5-6.0 | 320/190 | 0.014/0.36 | 3.2 | 4.2 | 0.066 |
| SPD2-US-070-190 | 7 | 5.5-6.0 SVG / 5.5-7.0 Carotid | 190 | 0.014/0.36 | 3.2 | 4.2 | 0.066 |
| SPD2-US-070-320 | 7 | 5.5-6.0 SVG / 5.5-7.0 Carotid | 320/190 | 0.014/0.36 | 3.2 | 4.2 | 0.066 |
Carotid Indication: The SpiderFX Embolic Protection Device is indicated for use as a guidewire and embolic protection system to contain and remove embolic material (thrombus/debris) while performing angioplasty and stenting procedures in carotid arteries. The diameter of the artery at the site of the filter basket placement should be between 3.0 mm and 7.0 mm.
CAUTION: Federal (USA) law restricts this device to sale by or on the order of a physician. Indications, contraindications, warnings and instructions for use can be found in the product labeling supplied with each device.